Ernst Armory LLC

FN Made FAL Barrel cut to 15" and a Vortex Flash Hider professionally welded on making the overall legal length of 16.25". Bore is Good, but shows some wear. Gas Port may need opened larger, but is currently at 0.120".

Exclusive only at Ernst Armory! Brand new Short Gas System FAL Barrel assembly. Counts for 3 US compliance parts; 13" Chrome Lined Barrel (US), permanently attached Browning Long Flash Hider (US) and Stainless Steel Gas Piston w/Spring (US). DSA...

Paratrooper Bolt Carrier, made by DSA. This is a factory 2nd, with the only defect being a ding on the backside of the carrier. It has a very slight amount of finish were from being installed in a rifle to insure proper fit. Like New Condition!

Hinge Pin for Folding Mechanism on Paratrooper FAL. South African Type.

Spring and Plunger for the Folding mechanism on Paratrooper Stocks. New Condition!

Unnumbered Rhodesian FAL Barrel cut to 17.5" and threaded standard 9/16th 24tpi LH. Made in South Africa. Very rare to find one without serial numbers. Good-VG Condition Bore, with light pitting in the bore from use. Still has a little original Camouflage Paint on it.

18" Paratrooper FAL Barrel. US Made by DSA. Like New Condition. Slightly thicker profile than standard. 9/16" 24 TPI Left Hand Thread.

Custom US made 18" FAL Barrel. Barrel made by Remington. Should produce excellent accuracy! ***Will require a custom Freefloat Handguard, or a standard Handguard can be used if the barrel profile is modified on the chamber end.*** Like New Condition!

Complete Recoil Spring Assembly for a Paratrooper FAL. Outer spring, two inner springs and spring guide. Original part, not US copy. Excellent Condition!

Brand New Paratrooper Top Cover. Works on all Metric and Inch Pattern FAL Rifles.